The construction chemicals manufacturers association, better known as CCMA, is the industry body that brings India’s construction chemical makers together. It exists to give manufacturers a shared voice, push for better quality, and help builders understand how admixtures, waterproofing systems, repair mortars and similar products should be used. This guide explains how the association began, who can join, what it does and how to reach it. If you are a manufacturer, supplier, applicator or specifier, the sections below will show you where it fits in your work.
Key Takeaways
- The construction chemicals manufacturers association is a trade body for India’s construction chemicals industry, and its website says it was founded in 2009.
- Its stated goals include awareness of quality, skilled application, tackling industry challenges and working with government.
- According to its website, members include manufacturers, suppliers, distributors, service providers and research institutes.
- It runs the C3 international conferences and a Suppliers Conference series, mostly in Mumbai.
- Membership rules reported in 2011 may have changed, so confirm current terms with the association.
What Are Construction Chemicals and Why Do They Matter?
Construction chemicals are specially formulated products that help building materials perform better in demanding conditions. The range runs from concrete admixtures to sealants and waterproofing systems. According to the 2011 interview with CCMA’s then President, they add to the durability and sustainability of concrete, which is why consistent quality and correct application matter so much.
How the Construction Chemicals Manufacturers Association Began
According to its official website, CCMA was founded in 2009 as a platform where manufacturers, suppliers and other stakeholders can promote best practices, establish quality standards and encourage innovation. Trade magazines covered its formation in 2010 and 2011, describing it as the representative body of leading construction chemicals makers in India.
The reasoning behind it was practical. In a 2011 interview with NBM&CW, the then President, Samir Surlaker of MC-Bauchemie (India), explained that the sector was a mix of organised and unorganised players. A single body, he said, could raise awareness, lift standards and encourage ethical practice in both manufacturing and service.
Growth followed. At the time of that interview theconstruction chemicals manufacturers association had over 25 member companies and planned regional centres in Gujarat, Chennai and Delhi. A 2016 conference report described it as having more than 60 members.
Timeline of the Construction Chemicals Manufacturers Association
- 2009: the year its website gives as the founding date.
- 2010: trade press reports the new body and its first annual general meeting.
- 2011: an NBM&CW interview records over 25 member companies.
- 2016: the C3 conference in Bengaluru; reports cite more than 60 members.
- 2023: the 4th Suppliers Conference in Navi Mumbai.
- 2025: the 5th Suppliers Conference (SCC 2025) in Mumbai.
What the Association Sets Out to Do
The website lists several aims. The association wants to spread awareness about the quality and correct use of construction chemicals and to help build the skills needed to apply them properly. It also takes on wider industry problems such as raw materials, quality, safety and environmental compliance, and it liaises with central and state governments on behalf of the sector.
The 2011 interview adds detail. Objectives included educating members through seminars and meetings, collecting and sharing statistical and technical information, and encouraging high standards and business ethics. Training for applicators was another priority, because the success of waterproofing and repair work depends heavily on how a product is applied.
Early conference reports on construction chemicals manufacturers association also mention an ambition to standardise and mark construction chemical products, so that end users can buy with more confidence.
Who Can Join the Construction Chemicals Manufacturers Association?
The website says the membership base covers manufacturers, suppliers, distributors, service providers and research institutes. It also has a separate page for membership registration.
CCMA’s Facebook page says manufacturers of construction chemicals, speciality chemicals and construction chemical applicators can become members, and points to the registration page on its website for sign-up.
The 2011 interview set out the original criteria. An ordinary member had to be a construction chemicals manufacturer in India, with more than five years of experience in India or abroad, a net worth in India above Rs 10 million, and a presence in at least four product categories. Associate membership was meant for manufacturers who did not meet those conditions, along with suppliers, distributors, applicators and other related trades.
Six categories were listed: patron, honorary, ordinary, associate, professional associate and affiliate. These details are about fifteen years old, so check the current membership page or contact the office before applying.
Products Covered by Member Companies
The same interview gives a useful picture of what counts as construction chemicals:
- Concrete admixtures and additives
- Prebagged cementitious mortars, such as grouts, tile adhesives, wall putty and repair mortars
- Injection materials for concrete and soil stabilisation
- Chemical systems for waterproofing and weatherproofing
- Polymeric and resinous products, including resin flooring and mortar-modifying polymers
- Sealants for expansion and construction joints
- Fibres for use in concrete
- Cement grinding aids and performance enhancers
- Auxiliary products, such as curing compounds and mould release agents
For a closer look at one admixture type, see our guide to retarder admixture.
Conferences Hosted by the Construction Chemicals Manufacturers Association
Events are among the most visible activities of this industry body. Its C3 series is an international construction chemicals conference. The 2016 edition took place in Bengaluru on 2 and 3 June at the Grand Venue, NIMHANS, and drew about 400 delegates. The 7th edition was held in Mumbai, where CCMA Broadcast, the association’s bimonthly newsletter, was also released. The website now lists a 9th international conference as well.
A separate Suppliers Conference looks at inputs and raw materials. The 4th edition ran on 4 and 5 December 2023 at Taj Vivanta, Navi Mumbai, under the theme “Construction Chemicals for the Next Gen”. The 5th edition, SCC 2025, took place on 19 and 20 May 2025 at Taj The Trees, Vikhroli, Mumbai, and focused on new-generation raw materials and dry mix mortars.
Beyond these flagship events, the website menu also lists regional C3 events and CCMA Web Talks.
Standards and Partnerships
Quality work in this sector rests on shared standards, and the construction chemicals manufacturers association works with several outside bodies to support them. The Bureau of Indian Standards is the country’s national standards body, established under the BIS Act, 2016, and CCMA lists it among the organisations it collaborates with. The association’s website names other partners too, including CIDC, the Indian Concrete Institute, FICCI, CII and ASSOCHAM, and says the association is a permanent member of the Engineering Council of India.
Policy and Advocacy Work of the Construction Chemicals Manufacturers Association
Acting as an industry body before government is a core part of the role. In 2011 the association set up a commercial committee to study state-wise tax rates, which differed from one construction chemical to another and, in its view, created an uneven playing field. It planned to ask the government to rationalise those rates, seek relief on import and excise duties for a young industry, and involve FICCI and CII in making the case.
Those were early-stage plans. For current policy positions, rely on the association’s latest communications.
How to Contact the Construction Chemicals Manufacturers Association
The association’s office is at B-6 23, 1st Floor, BGTA Narmada Premises Co-op Society Ltd, Wadala Truck Terminal, opposite RTO, Wadala (East), Mumbai 400037. You can email ccmaindiamc@gmail.com or call +91-98451 74714, as listed on its website.
How It Compares With Similar Bodies Abroad
India is not the only market with a dedicated body for this sector. Germany’s Deutsche Bauchemie, for example, was established in 1948, has about 140 member companies and acts as the link between its members, politicians, public authorities and standardisation institutes. The construction chemicals manufacturers association is much younger and plays a similar connecting role for Indian manufacturers, suppliers and applicators.
Frequently Asked Questions
What is the construction chemicals manufacturers association?
It is CCMA, an industry body and trade body for India’s construction chemicals sector. It was formed by leading manufacturers as a representative body and works on awareness, quality, skills and dialogue with government.
When was CCMA founded?
The association’s website says it was founded in 2009. Trade magazines reported its formation and first annual general meeting in 2010.
Who can join CCMA?
The website says membership spans manufacturers, suppliers, distributors, service providers and research institutes. Criteria reported in 2011 differed for ordinary and associate members, so confirm the current rules with the office.
What does CCMA do?
It promotes the correct use and quality of construction chemicals, supports skill development for applicators, addresses industry challenges, liaises with government and hosts conferences such as C3 and the Suppliers Conference.
Where is CCMA located?
The construction chemicals manufacturers association lists its office in Wadala (East), Mumbai 400037, India.
Conclusion
The construction chemicals manufacturers association gives a fragmented industry a common platform for quality, training, events and dialogue with government. Its aims and activities, as set out on its own website and in trade coverage, show a body working to raise confidence in how these products are made and applied. If you work with these materials, following CCMA’s conferences and announcements is a practical way to stay informed. Before acting on membership terms or contact details, confirm them directly with the association.
